Thanks Thanks:  0
Likes Likes:  1
Results 1 to 2 of 2

Thread: Quivertips

  1. Default Quivertips

    I have been given 3 universal quivertips. I have seen somewhere that you can sand them down to fit my feeder rod. It says to use wet and dry sandpaper (wet). Could anybody tell me which grit to use.
    Many thanks steve

  2. #2
    Join Date
    Sep 2009
    Location
    Dronfield Derbyshire
    Posts
    1,774

    Default Re: Quivertips

    Start with medium 120-150
    Finish with fine 180-220
    Roll the paper around the tip and roll the tip not the paper.
    Tri to keep an even roll check every 4 or 5 turns don’t take too much off
    Trust me I’m an Engineer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •