seth49
Well-known member
I have one of the Korum deluxe chairs and I noticed that one of the hand wheels that you unscrew to raise and lower the chair back felt loose and didn’t work properly.
So I’ve just had a look at it and there’s a round cover inset into the handwheel which is just a push fit, if you take that out inside there’s a Allen screw which holds the wheel to the screw that turns to open and close the mechanism, the screw had worked loose which was causing the problem.
So while I had it dismantled I gave it a spray with some graphite oil, and then reassembled it and tightened the screw, works a treat now and I did the other side as well, which was starting to come loose also, tightened all other screws and bolts as well, it’s like a new chair now, and shouldn’t give any more problems.
So I’ve just had a look at it and there’s a round cover inset into the handwheel which is just a push fit, if you take that out inside there’s a Allen screw which holds the wheel to the screw that turns to open and close the mechanism, the screw had worked loose which was causing the problem.
So while I had it dismantled I gave it a spray with some graphite oil, and then reassembled it and tightened the screw, works a treat now and I did the other side as well, which was starting to come loose also, tightened all other screws and bolts as well, it’s like a new chair now, and shouldn’t give any more problems.