FishingMagic Forums

FishingMagic Forums (https://www.fishingmagic.com/forums/)
-   Coarse Fishing (https://www.fishingmagic.com/forums/coarse-fishing/)
-   -   Black Cap feeders. (https://www.fishingmagic.com/forums/coarse-fishing/330531-black-cap-feeders.html)

cg74 26-02-2013 13:40

Black Cap feeders.
 
IMO the best maggot feeder on the market BUT they aren't always big enough, does anyone know of a very similar design of feeder that is larger?

frothy 26-02-2013 13:52

Re: Black Cap feeders.
 
Think nisa might do something similar in a larger size, do you prefer them clear?

tiinker 26-02-2013 13:58

Re: Black Cap feeders.
 
Quote:

Originally Posted by cg74 (Post 1212839)
IMO the best maggot feeder on the market BUT they aren't always big enough, does anyone know of a very similar design of feeder that is larger?

How big do you want them I have black caps up to about 3+ inches fox make one that is like a dustbin with ajustable ends to govern the flow od bait .

sam vimes 26-02-2013 14:10

Re: Black Cap feeders.
 
Drennan Vari-Weight Swimfeeders - Matchman Supplies

jasonbean1 26-02-2013 17:25

Re: Black Cap feeders.
 
Quote:

Originally Posted by sam vimes (Post 1212853)

good idea but nor durable like the kamasan

sam vimes 26-02-2013 17:30

Re: Black Cap feeders.
 
Quote:

Originally Posted by jasonbean1 (Post 1212900)
good idea but nor durable like the kamasan

I've not managed to trash any yet. The worst I've managed is to lose one of the weights. Is it a cold water problem? Do they get brittle?

cg74 26-02-2013 17:31

Re: Black Cap feeders.
 
Quote:

Originally Posted by tiinker (Post 1212848)
How big do you want them I have black caps up to about 3+ inches fox make one that is like a dustbin with ajustable ends to govern the flow od bait .

I currently have what I thought was the biggest Black Cap feeder, with a cylinder of 40mm long and 25mm wide.
The largest one in this pic:
http://assets.tedcarter.co.uk/produc...wimfeeders.jpg

Ideally I'd want about another 15mm(ish) in length.

On saying that, all these adjustable feeders on the market have got me intrigued. I think I'll buy a few and give them a bash and with my s*** casting it won't take that long to trial all the ones already mentioned.

Thanks for suggestions, any more out there?

ravey 26-02-2013 17:46

Re: Black Cap feeders.
 
Dinsmores do a white-capped 'plastic pig'. Even the small is probably not much smaller than the largest black cap Kamasan. The jumbo is as described, but probably would not cast well. They will deliver a fair pile of bait, though.

The black caps are well designed, but a bit on the dear side for me.

I usually buy my Dinsmores by the bag of 50 for my barbel fishing at 50-55p each. I use the 'medium' size in 1.5 and 2.0 oz for barbelling.

More subtle feedering sees me use some stockpiled Thameslys in small size which are unfortunately no longer available.

tiinker 26-02-2013 18:26

Re: Black Cap feeders.
 
Quote:

Originally Posted by cg74 (Post 1212903)
I currently have what I thought was the biggest Black Cap feeder, with a cylinder of 40mm long and 25mm wide.
The largest one in this pic:
http://assets.tedcarter.co.uk/produc...wimfeeders.jpg

Ideally I'd want about another 15mm(ish) in length.

On saying that, all these adjustable feeders on the market have got me intrigued. I think I'll buy a few and give them a bash and with my s*** casting it won't take that long to trial all the ones already mentioned.

Thanks for suggestions, any more out there?

The biggest I have are 60mm 30gm the fox are 40mm across and 80mm long size 1 57gm they are top opening and have a air vent system to control bait release

bankside 01-03-2013 20:37

Re: Black Cap feeders.
 
Have you looked at the Korum multi feeder,its like a dustbin for
maggots!!!


All times are GMT. The time now is 00:07.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.40 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
2000-2017 Fish&Fly Ltd