Thanks Thanks:  0
Likes Likes:  2
Results 1 to 5 of 5

Thread: Building a rod

  1. #1

    Default Building a rod

    I'm talking as a complete amateur here. I've noticed a few website selling Harrison rod blanks, and without doing much research at all, thought I would ask here. Firstly, is it a challenge to do? I've whipped a few rings on in the past but that's it. I'm average at diy.....

    Secondly, would it save money at all?

    I fancy doing it just from a 'I built that' perspective.


    Sent from my iPhone using Tapatalk
    Please visit my blog at www.jimmysfishing.blogspot.com

  2. #2
    Join Date
    Jul 2009
    Location
    metroland.....
    Posts
    7,255

    Default Re: Building a rod

    Might save money at first by buying a cheap telescopic 3m whip for a tenner and whipping the eyes on all the different sections before you attempt Harrison blanks.

  3. #3
    Join Date
    Jan 2011
    Location
    North Yorkshire.
    Posts
    10,343

    Default Re: Building a rod

    Look at it as a labour of love and the opportunity to get something totally personal rather than a cost cutting exercise. By the time you buy the blank, quality rings, reel seat, cork, whipping thread, epoxy/varnish and other bits and bats you might need, you might not find any saving at all, even compared to a good custom builder.

    It seems crazy, but I know that I've bought complete off the shelf rods for less than I could source just the set of rings fitted to them. Rod building quite appeals to me, in much the same way as building PCs used to. I stopped doing that quite a while ago when the savings dried up. I feel that rod building is probably similar. I've not even bothered to replace the odd damaged ring myself. I have looked into it, but it's never struck me as cost effective by the time you buy the right kit in.

    I know that many of the older generations are quite adept at rod building. However, I believe that in many cases it was born of necessity. I know a few older specialist anglers that firmly believed that they simply could not buy exactly what they wanted, they had to make them. A lot of them don't make their own any longer though, there's no need.

  4. #4

    Default Re: Building a rod

    The old fella made all his own rods, including my first rod. I suppose there's a bit of nostalgia mixed in with making something personal. I think I'll have a read up on it and think further....


    Sent from my iPhone using Tapatalk
    Please visit my blog at www.jimmysfishing.blogspot.com

  5. #5
    Join Date
    Apr 2011
    Location
    Bradford, West Yorkshire
    Posts
    3,174

    Default Re: Building a rod

    Just do it if its in your blood Jim!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •