Reel Maintenance help

Matty C · Oct 6, 2007

Hi guys,,

I have a problem.. My reel isnt workin right, n basically to cut a long story short, Ive taken it apart n know when the problem is.. a screw has come loose, letting a cog jump out of place, thus making the rel useless.. the problem I have is that I cant get to the screw, as the main shaft on which the spool sits is in the way..

If there is anyone that knows how to get the shaft out so I can tighten the screw, I would be very greatful

The reel incidently, is a Wychwood Maximiser 70

Many thanks

Matt

Cakey · Oct 7, 2007

should look like this.............................

Les Clark ( not too proud to nick a good idea fro · Oct 7, 2007

Put it back together Matty and send it back .

John H Member of THE C.S.G.. & The A.T. · Oct 7, 2007

Having spent the last 30-35 years stripping down and re assembling under engineered far eastern (crap) small mechanisms, do as Les sez...send it back

twitch · Oct 8, 2007

Hi Matt,

if you take the spool off and look at the shaft where it enters the body of the reel, there should be a nut. undoing this should enable you to remove the shaft.

Or you can always send it back

Reel Maintenance help

Matty C

New member

Cakey

Guest

Les Clark ( not too proud to nick a good idea fro

New member

John H Member of THE C.S.G.. & The A.T.

Guest

twitch

New member