davethesax
Well-known member
I’m contemplating buying a line counter to assist in loading fixed reel spools with backing line before loading main line. Has anyone an opinion on the Berkley modal or any other make.
Hi Dave,... a line counter to assist in loading fixed reel spools .....
Hi Dave,
I used to use a Shakespeare Digital line counter (very similar to the Berkeley counter) for loading Sea-fishing Multipliers from Bulk spools and it was OK for that. It cost £16 about 15 yrs ago!
The problem occurred with FS reels since the way the counter mounts is designed with the display face-up for top-mounted multipliers - but would be face down for FS reels. This means you have to guess when to stop, turn the whole assenmbly over, read the display, turn it back, untangle the loose line, and repeat until filled to the desired level - or fed-up whichever occurs first!
I note the Berkeley counter has the same design attribute - for muliplier use!
In the end I found it easier to work out the average retrieve per crank of the handle, then just count these - errors were within an acceptable range!
I never used it for its original designed purpose of 'Controlled Depth Fishing' of a night time (it has an illuminated display)!
Good Luck!
Couple of things Dave,
- I use a small telescopic rod for winding line on so as not to poke missus, dog, grandkids, etc - the whippy tip section keeps a constant tension during the winding-on process.
- winding 'backwards' is a pain but if you really want to do this - make sure you use the anti-reverse to stop you accidently winding the wrong way and getting yourself in a tangle!
I still find the counting cranks the easiest, you can turn over the rod&counter assembly the minimum number of times to avoid tangles. the only other prob is putting the counter between the butt and next-up ring can move it out of easy focussing distance - depending on your eyesight!
Have fun - and remember the only accurate way to add the right amount of backing line is to load it 'back-to-front - your 'main-line' on the empty spool first, then backing line 'til you've filled the spool comfortably - then wind the lot onto the other spare spool - job's a good un!
The only real snag with this method of perfectly filling the spool with mainline + backing (you of course have the spare spool in your back pocket) - is remembering not to put any more twist in the line! Try It! mg:
Have fun!