coenstork
Member
- Joined
- Nov 12, 2009
- Messages
- 18
- Reaction score
- 1
I have purchased Stotz sizes 8 to13. I wish to set up pole floats size
4x1
4x18
1.5g
4x14
0.5g
4x12
This is printed on the float body.
These stotz are only tiny. Do I put loads on in a bulk or do I use shot as well.
Should I use olivettes and if so I have the following questions.
Olivettes are pear shaped. Is the narrow part to the top or bottom. If hypothetically I have a 1g float do I use a 1g olivette or what.
I appreciate that there are many questions here but I am a newbie to the po,e and need the advice. Thanks
4x1
4x18
1.5g
4x14
0.5g
4x12
This is printed on the float body.
These stotz are only tiny. Do I put loads on in a bulk or do I use shot as well.
Should I use olivettes and if so I have the following questions.
Olivettes are pear shaped. Is the narrow part to the top or bottom. If hypothetically I have a 1g float do I use a 1g olivette or what.
I appreciate that there are many questions here but I am a newbie to the po,e and need the advice. Thanks