Class 1M
Class 1M lasers are products which produce either a highly divergent beam or a large diameter beam. Therefore, only a small part of the whole laser beam can enter the eye. However, these laser products can be harmful to the eye if the beam is viewed using magnifying optical instruments. Some of the lasers used for fibre-optic communication systems are Class 1M laser products.Class 2
Class 2 lasers are limited to a maximum output power of 1 milliwatt or one thousandth of a watt (abbreviated to mW) and the beam must have a wavelength between 400 and 700 nm. A person receiving an eye exposure from a Class 2 laser beam, either accidentally or as a result of someone else's deliberate action (misuse) will be protected from injury by their own natural aversion response. This is a natural involuntary response which causes the individual to blink and avert their head thereby terminating the eye exposure. Repeated, deliberate exposure to the laser beam may not be safe. Some laser pointers and barcode scanners are Class 2 laser products.Class 2M
Class 2M lasers are products which produce either a highly divergent beam or a large diameter beam in the wavelength range 400 to 700 nm. Therefore, only a small part of the whole laser beam can enter the eye and this is limited to 1 mW, similar to a Class 2 laser product. However, these products can be harmful to the eye if the beam is viewed using magnifying optical instruments or for long periods of time. Some lasers used for civil engineering applications, such as level and orientation instruments are Class 2M laser products.Class 3R
Class 3R lasers are higher powered devices than Class 1 and Class 2 and may have a maximum output power of 5 mW or 5 times the Accessible Emission Limit (AEL) for a Class 1 product. The laser beams from these products exceed the maximum permissible exposure for accidental viewing and can potentially cause eye injuries.
--------------------------------------------------------------------------------------------------------
These classifications are based however on the human eye and the wavelengths / frequencies it is sensitive to, different animals eyes work in different ways and can be more or less sensitive than our own. Consequently you could quite feasibly blind a duck with a laser classified as 'safe'. Personally I wouldn't take the risk.